LiF/CaO催化碳酸乙烯酯和甲醇合成碳酸二甲酯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划


Transesterification of Ethylene Carbonate with Methanol to Dimethyl Carbonate over LiF/CaO Catalyst
Author:
Affiliation:

Fund Project:

National key research and development plan of China

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    摘要:以碳酸乙烯酯和甲醇为原料,采用浸渍法制备了LiF/CaO催化剂,考察该催化剂在碳酸乙烯酯 (EC)与甲醇酯交换反应制备碳酸二甲酯 (DMC)中的催化性能。采用X射线衍射、N2低温吸附和哈米特滴定等对催化剂进行表征。结果表明,催化剂LiF/CaO在焙烧后生成新相CaF2和Li2O。在LiF负载量为20%(CaO的质量分数),焙烧温度为500℃,甲醇与EC物质的量比为10:1,催化剂用量为碳酸乙烯酯质量的0.1%,反应温度70℃,反应时间为0.5h的条件下,EC转化率、DMC选择性和收率分别为77.98%、99.97%和77.96%。

    Abstract:

    Abstract: The experiment uses ethylene carbonate and methanol as raw materials and the LiF/CaO catalyst was prepared by impregnation method. The catalytic activity of LiF/CaO for the synthesis of dimethyl carbonate (DMC) by transesterification of ethylene carbonate (EC) with methanol was studied. The catalysts were characterized by X-ray diffraction, N2 adsorption-desorption and Hammett titration. The results indicated that new phases CaF2 and Li2O were formed when LiF/CaO was calcined. In the case of LiF loading and calcination temperature were 20%(based on mass of CaO) and 500℃, n(Methanol): n(EC) = 10:1, catalyst amount 0.1%(based on mass of EC), reaction temperature 70℃, reaction time 0.5 h. Under these conditions, EC conversion, DMC selectivity and yield were 77.98%, 99.97% and 77.96%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

张彬,张华,王公应,杨先贵. LiF/CaO催化碳酸乙烯酯和甲醇合成碳酸二甲酯[J].精细化工,2020,37(1):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-05-22
  • 最后修改日期:2019-06-26
  • 录用日期:2019-06-27
  • 在线发布日期: 2019-11-27
  • 出版日期: