石墨烯/SnO2/Si@PPy复合材料制备及电化学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Electrochemical Performance of Graphene/SnO2/Si@PPy Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氧化石墨烯和SnCl2为原料,通过微波水热法合成了石墨烯/SnO2复合材料(GS),以过硫酸铵为引发剂,通过吡咯在Si粉表面原位氧化聚合制备了Si@PPy包覆结构(SP),最后通过微波水热组装法制备了石墨烯/SnO2/Si@PPy复合材料(GSSP)。采用SEM、TEM、XRD、Raman和BET对GS、SP和GSSP材料的形貌和结构进行表征,并以GSSP复合材料为负极组装半电池进行倍率、循环、CV和EIS等电化学性能测试。结果表明:GSSP复合材料具有优异的倍率性能,在100 mA/g电流密度下,放电和充电的平均比容量分别为948.44和869.63 mAh/g。1000 mA/g电流密度下,经过400次循环放电和充电的比容量保持率高达90.69%和89.34%。

    Abstract:

    Graphene/SnO2 (GS) composites were synthesized from graphene oxide and SnCl2 by microwave hydrothermal method. Using ammonium persulfate as initiator, the coating structure of Si@PPy (SP) was prepared by in situ oxidation polymerization of pyrrole on the surface of Si powders. Graphene/SnO2/Si@PPy (GSSP) composites were prepared by microwave hydrothermal assembly method. The morphology and structure of GS, SP and GSSP were characterized by SEM, TEM, XRD, Raman and BET. The half-cells were assembled with GSSP composite as anode, and then the electrochemical properties were tested, such as rate performance, cyclic performance, CV and EIS. The results showed that the GSSP composite had excellent rate performance. At a current density of 100 mA/g, the average specific capacity of discharge and charge is 948.44 mAh/g and 869.63 mAh/g, respectively. Under the current density of 1000 mA/g, the specific capacity retention rate after 400 cycles of discharge and charge was up to 90.69% and 89.34%.

    参考文献
    相似文献
    引证文献
引用本文

王珏,于平,付东,张晓臣,张伟君,阚侃.石墨烯/SnO2/Si@PPy复合材料制备及电化学性能[J].精细化工,2020,37(2):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2019-06-10
  • 最后修改日期:2019-07-24
  • 录用日期:2019-07-30
  • 在线发布日期: 2020-01-10
  • 出版日期: