有机/无机复合型降滤失剂LJ-1的合成及评价
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Evaluation of organic/inorganic fluid loss agent LJ-1 for Drilling Fluid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    摘要:以丙烯酰胺(AM)、2-丙烯酰胺基-2甲基丙磺酸(AMPS)、衣康酸(IA)、二烯丙基二甲基氯化铵(DMDAAC)为单体,聚合得到P(AAID),以其为基体,nano-SiO2为填料,γ―氨丙基三乙氧基硅烷(KH-550)为偶联剂,研制一种有机/无机复合添加剂LJ-1。通过正交实验方法确定最佳反应条件为:质量配比m(AM):m(AMPS):m(IA):m(DMDAAC)=8:5:1:2,反应温度65 ℃,反应时间4 h,引发剂过硫酸铵(APS)加量为1.0 %。采用FT-IR、1HNMR对LJ-1降滤失剂进行化学结构表征,并对其性能进行评价。结果表明,淡水基浆中LJ-1降滤失剂质量加量为1.5 %时,FLAPI = 5.8 mL,具有良好的降滤失性能;盐水基浆中LJ-1降滤失剂质量加量为3.0 %,FLHTHP = 18.4 mL,具有良好的抗盐性;另外,利用扫描电镜(SEM)对钻井液滤饼进行微观表征,结果显示滤饼坚韧致密并具有致密的网架结构。

    Abstract:

    Abstract: In this paper, with P (AAID) as matrix, nano-silica packing under the action of coupling agent, synthesis a new type of organic/inorganic composite drilling fluid loss agent LJ-1.P(AAID) is prepared with monomers IA,AM, AMPS and DMDAAC and the initiator is (NH4)2S2O8 . The optimal molar ratio of monomers is obtained by orthogonal experimental method and the result shows that optimal mass ratio is m(AM):m(AMPS):m(IA):m(DMDAAC)=8:5:1:2. In addition, the optimum reaction conditions as follows: the reaction temperature 65 ℃ and reaction time is 4 h, the initiator adding amount is 1.0 % (based on the mass of monomers). The fluid loss agent LJ-1 chemical structure were characterized by FT-IR and 1HNMR;Finally, evaluated the properties of the fluid loss agent LJ-1.The results showed that the fresh water base fluid loss agent LJ-1 in the pulp quality and quantity was 1.5%, FLAPI=5.8 mL;Salt aqueous fluid loss agent LJ-1 in the pulp quality and quantity of 3.0%, FLHTHP=18.4 mL, LJ-1 has good filtration and salt resistance performance. Additionally, the micro structure of filter cake is conducted by scanning electron microscopy (SEM) and the results shows that the filter cake have a dense grid structure.

    参考文献
    相似文献
    引证文献
引用本文

郑勇.有机/无机复合型降滤失剂LJ-1的合成及评价[J].精细化工,2017,34(7):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-11-23
  • 最后修改日期:2017-03-02
  • 录用日期:2017-03-17
  • 在线发布日期: 2017-06-02
  • 出版日期: